ABS Module Service and Bleeding in Riverside, CA
ABS, ESP, and traction faults read with factory tools and properly bled.
ABS module service and bleeding fixes the ABS, ESP, and traction lights that leave a commercial van without its stability systems. A faulty wheel speed sensor or trapped air in the ABS unit disables the safety net a loaded fleet van relies on to stay planted. We read the fault with factory tools, then repair and properly bleed the system in-shop in Yorba Linda.
What this service includes
- Factory scan of ABS, ESP, and traction fault codes
- Wheel speed sensor testing and replacement
- ABS pump and module diagnosis
- Proper ABS bleed procedure with a factory tool
- Tone ring and wiring inspection
- Brake fluid replacement during the bleed
- Post-repair verification that the lights clear
Who this is for
- Commercial vans with an ABS, ESP, or traction light on
- Vans where stability control has dropped out
- Drivers after a wheel speed sensor fault
- Loaded fleet vans that need the full safety system working
Frequently asked questions
What turns on the ABS and ESP lights on a commercial van?
Common causes are a failed wheel speed sensor, a damaged tone ring, wiring faults, or an internal ABS unit problem. We read the fault codes with factory tools to find the real cause instead of guessing at parts.
Can you bleed the ABS unit properly?
Yes. The ABS unit needs a factory-tool bleed procedure to clear trapped air that a manual bleed cannot reach. We run that procedure so the pedal is firm and the system works.
Is it safe to drive with the ABS light on?
The van still has base brakes, but ABS, stability, and traction control may be disabled, which matters most with a loaded fleet van. We recommend having it read and repaired promptly.
Get your Sprinter or commercial van back on the road
Serving Riverside from our Yorba Linda facility. Straightforward written quotes, insurance help for collision, and honest, documented work.