# Torque Converter Service in Riverside, CA

Canonical: https://commercialvanrepairshop.com/services/transmission-clutch/torque-converter-service/
Business: Commercial Van Repair Shop, Yorba Linda, CA. Serving Riverside, California.
Phone: (714) 646-1433 | Email: info@ocrvcenter.com

Torque converter service for your Sprinter tackles shudder, slipping lockup, and codes from a worn converter or clutch that make freeway miles miserable. We confirm the fault with Xentry live data, then replace the torque converter, flush the cooler and lines to clear debris, and refill to the correct level, so power transfers smoothly without shudder on the 91 or the 15.


## What this includes
- Xentry confirmation of shudder or lockup faults
- Torque converter replacement
- Cooler and line flush to remove debris
- Fresh MB-spec fluid at the correct fill level
- Inspection of the flexplate and seals
- Road test to confirm smooth lockup

## Who it is for
- You feel a shudder at light throttle around 40 mph
- Lockup slips or a converter code is stored
- Debris from a failure needs flushing out
- The transmission runs hot on the freeway

## Pricing
Mechanical labor runs $260 per hour; a converter replacement plus a cooler flush is set in writing after inspection.

## FAQ
### What causes a shudder around 40 mph?
A worn torque converter lockup clutch often shudders at light throttle. We confirm it with Xentry live data before replacing the converter.

### Why flush the cooler and lines?
A failed converter sheds debris that lodges in the cooler and lines. Flushing them keeps that debris from damaging the new converter.

### Can a bad converter cause overheating?
Yes. A slipping or failing converter builds heat in the transmission. Replacing it and refreshing the fluid brings temperatures back down.

### Do you replace the fluid with the converter?
Yes. We refill with the correct MB-spec fluid to the proper temperature level so lockup engages smoothly after the repair.